STANDARD MANUAL HAND OPERATED TOP SHAFT CONTROL WITH FORWARD/REVERSE FOOT PEDAL.
TOP SPEED: 87 RPM (73.25 SURFACE FT/MIN.)
PACKAGES AVAILABLE WITH SERVO TOP SHAFT AND HMI.
SOLID CAST-IRON FRAME AND LARGE OIL BATH GEARCASE.
1 HP MOTOR: 110V
WEIGHT: 500LBS.
EASY TO OPERATE:
OUR POWERED ROTARY MACHINE REDUCES THE REPETITIVE STRAIN ON YOUR OPERATOR, AND INCREASES PRODUCTIVITY IN THE SHOP!
COMES WITH THE FORWARD/REVERSE FOOT PEDAL THAT MAKES CREATING PROFILES EASY.
ONLY REQUIRES 110V POWER.
ADDITIONAL ACCESSORIES:
A HEAVY-DUTY BASE STAND THAT RAISES THE STANDARD WORKING HEIGHT OF THE MACHINE FROM 31.5” TO 42”.
OUR POPULAR LARGE BACK STOP, WHICH REPLACES THE SMALLER FACTORY PLATE WITH A 20” X 20” PLATE MADE FROM WEAR-RESISTANT ARMOR PLATE FOR CUSTOMERS USING PLASMA CUT PARTS. THE LARGE BACK PLATE ALSO HAS ANGLED SLOTS THAT HOLD THE INCLUDED BEARINGS THAT ARE USED FOR SUPPORT, THEREBY MINIMIZING MOVEMENT OF THE PART WHILE IT IS BEING FORMED.
FOR THOSE CUSTOMERS FORMING LONGER LENGTH TUBES, WE OFFER OUR SPRING-LOADED PIPE SUPPORT STAND, WHICH APPLIES CONSISTENT PRESSURE TO THE PART AGAINST THE BACKSTOP. THIS SUPPORT STAND IS ALSO ADJUSTABLE IN HEIGHT TO ENSURE THE TUBE STAYS IN A HORIZONTAL POSITION.
NEW EMPIRE EM-PRO EMT-7R WITH SERVO TOP SHAFT CONTROL
(INCLUDES ONE SET – 3/8″ SINGLE BEAD ROLLS)
THROAT DEPTH VARIES FROM 4-1/8” TO 9-1/8”.
CAPACITY: 14GA MILD STEEL, 16GA STAINLESS
STANDARD MANUAL HAND OPERATED TOP SHAFT CONTROL WITH FORWARD/REVERSE FOOT PEDAL.
TOP SPEED: 87 RPM (73.25 SURFACE FT/MIN.)
PACKAGES AVAILABLE WITH SERVO TOP SHAFT AND HMI.
SOLID CAST-IRON FRAME AND LARGE OIL BATH GEARCASE.
1 HP MOTOR: 110V
WEIGHT: 500LBS.
EASY TO OPERATE:
OUR POWERED ROTARY MACHINE REDUCES THE REPETITIVE STRAIN ON YOUR OPERATOR, AND INCREASES PRODUCTIVITY IN THE SHOP!
COMES WITH THE FORWARD/REVERSE FOOT PEDAL THAT MAKES CREATING PROFILES EASY.
ONLY REQUIRES 110V POWER.
OPTIONAL ACCESSORIES:
A HEAVY-DUTY BASE STAND THAT RAISES THE STANDARD WORKING HEIGHT OF THE MACHINE FROM 31.5” TO 42”.
OUR POPULAR LARGE BACK STOP, WHICH REPLACES THE SMALLER FACTORY PLATE WITH A 20” X 20” PLATE MADE FROM WEAR-RESISTANT ARMOR PLATE FOR CUSTOMERS USING PLASMA CUT PARTS. THE LARGE BACK PLATE ALSO HAS ANGLED SLOTS THAT HOLD THE INCLUDED BEARINGS THAT ARE USED FOR SUPPORT, THEREBY MINIMIZING MOVEMENT OF THE PART WHILE IT IS BEING FORMED.
FOR THOSE CUSTOMERS FORMING LONGER LENGTH TUBES, WE OFFER OUR SPRING-LOADED PIPE SUPPORT STAND, WHICH APPLIES CONSISTENT PRESSURE TO THE PART AGAINST THE BACKSTOP. THIS SUPPORT STAND IS ALSO ADJUSTABLE IN HEIGHT TO ENSURE THE TUBE STAYS IN A HORIZONTAL POSITION.
STANDARD MANUAL HAND OPERATED TOP SHAFT CONTROL WITH FORWARD/REVERSE FOOT PEDAL.
TOP SPEED: 87 RPM (73.25 SURFACE FT/MIN.)
PACKAGES AVAILABLE WITH SERVO TOP SHAFT AND HMI.
SOLID CAST-IRON FRAME AND LARGE OIL BATH GEARCASE.
1 HP MOTOR: 110V
WEIGHT: 500LBS.
EASE OF USE:
OUR ROTARY/SWAGING MACHINE, ACCORDING TO MANY CURRENT OWNERS, IS “SIMPLY THE BEST OUT THERE”. THE EMT-7R COMES STANDARD WITH HAND-OPERATED TOP SHAFT OPERATION, BUT MANY CUSTOMERS ARE CHOOSING TO GO WITH THE SERVO ELECTRIC AND HMI OPTIONS ALSO. THESE OPTIONS ALLOW FOR ESSENTIALLY HANDS-FREE OPERATION, MAKING IT EASY ON THE OPERATOR AND AIDS IN REDUCING THE POSSIBILITY OF INJURIES CAUSED BY REPETITIVE STRAINING MOVEMENTS.
ADDITIONAL ACCESSORIES:
A HEAVY-DUTY BASE STAND THAT RAISES THE STANDARD WORKING HEIGHT OF THE MACHINE FROM 31.5” TO 42”.
OUR POPULAR LARGE BACK STOP, WHICH REPLACES THE SMALLER FACTORY PLATE WITH A 20” X 20” PLATE MADE FROM WEAR-RESISTANT ARMOR PLATE FOR CUSTOMERS USING PLASMA CUT PARTS. THE LARGE BACK PLATE ALSO HAS ANGLED SLOTS THAT HOLD THE INCLUDED BEARINGS THAT ARE USED FOR SUPPORT, THEREBY MINIMIZING MOVEMENT OF THE PART WHILE IT IS BEING FORMED.
FOR THOSE CUSTOMERS FORMING LONGER LENGTH TUBES, WE OFFER OUR SPRING-LOADED PIPE SUPPORT STAND, WHICH APPLIES CONSISTENT PRESSURE TO THE PART AGAINST THE BACKSTOP. THIS SUPPORT STAND IS ALSO ADJUSTABLE IN HEIGHT TO ENSURE THE TUBE STAYS IN A HORIZONTAL POSITION.
NEW EMPIRE EM-PRO EMT-7R WITH MANUAL TOP CRANK
(INCLUDES ONE SET – 3/8″ SINGLE BEAD ROLLS)
THROAT DEPTH VARIES FROM 4-1/8” TO 9-1/8”.
CAPACITY: 14GA MILD STEEL, 16GA STAINLESS
STANDARD MANUAL HAND OPERATED TOP SHAFT CONTROL WITH FORWARD/REVERSE FOOT PEDAL.
TOP SPEED: 87 RPM (73.25 SURFACE FT/MIN.)
PACKAGES AVAILABLE WITH SERVO TOP SHAFT AND HMI.
SOLID CAST-IRON FRAME AND LARGE OIL BATH GEARCASE.
1 HP MOTOR: 110V
WEIGHT: 500LBS.
EASY TO OPERATE:
OUR POWERED ROTARY MACHINE REDUCES THE REPETITIVE STRAIN ON YOUR OPERATOR, AND INCREASES PRODUCTIVITY IN THE SHOP!
COMES WITH THE FORWARD/REVERSE FOOT PEDAL THAT MAKES CREATING PROFILES EASY.
ONLY REQUIRES 110V POWER.
ADDITIONAL ACCESSORIES:
A HEAVY-DUTY BASE STAND THAT RAISES THE STANDARD WORKING HEIGHT OF THE MACHINE FROM 31.5” TO 42”.
OUR POPULAR LARGE BACK STOP, WHICH REPLACES THE SMALLER FACTORY PLATE WITH A 20” X 20” PLATE MADE FROM WEAR-RESISTANT ARMOR PLATE FOR CUSTOMERS USING PLASMA CUT PARTS. THE LARGE BACK PLATE ALSO HAS ANGLED SLOTS THAT HOLD THE INCLUDED BEARINGS THAT ARE USED FOR SUPPORT, THEREBY MINIMIZING MOVEMENT OF THE PART WHILE IT IS BEING FORMED.
FOR THOSE CUSTOMERS FORMING LONGER LENGTH TUBES, WE OFFER OUR SPRING-LOADED PIPE SUPPORT STAND, WHICH APPLIES CONSISTENT PRESSURE TO THE PART AGAINST THE BACKSTOP. THIS SUPPORT STAND IS ALSO ADJUSTABLE IN HEIGHT TO ENSURE THE TUBE STAYS IN A HORIZONTAL POSITION.
Condition: NEW
Type: ROTARY MACHINE
Manufacturer: EMPIRE MACHINRY
Model: EMT-7R