Type: manual Mild Steel Capacity: 16 gauge (1.6mm) Stainless Capacity: 20 gauge (.9mm) Cutting Length (inches): 52 Weight (pounds): 950 Dimensions (LxWxH): 61 x 36 x 42

These Tennsmith kick shears (sometimes called stomp shears or foot squaring shears)are activated manually by stepping on the foot pedal on the front of the machine. They feature ground-alloy tool steel blades machined with an edge relief for maximum material penetration with minimum effort. These tri-action blades help prevent material movement while shearing while prolonging blade life. Tennsmith shears have the most complete adjustment features of any sheet metal shear on the market.

The lower shear blade is bed-adjusting and the upper blade is adjustable by means of a truss bar on the cutter head. The spring-activated hold down feet clamp the work piece securely in place and are easily adjustable to compensate holding pressure for light or heavy gauge material. There is ample clearance between the hold down feet and shear blades to allow good operator vision for line-of-sight cutting. The standard, double-locking back gauge, which features embossed scales and vernier wheels for fine adjustment, gives highly accurate readings.

Condition: NEW

Type: FOOT SHEAR

Manufacturer: TENNSMITH

Model: 52IN

Type: manual Mild Steel Capacity: 16 gauge (1.6mm) Stainless Capacity: 20 gauge (.9mm) Working Length (inches): 48 Max Depth Of Box (inches): 4 Max Lift Of Beam (inches): 1.25 Front To Rear Adj (inches): .625 Min Reverse Bend (inches): .25 Minimum Flange Capacity (inches): 1 Number/Width Of Fingers: 2, 3, 4 inch Max Forming Length (inches): 48-1/4 Weight (pounds): 495 Dimensions (LxWxH): 60 x 19 x 24

Tennsmith's bench mounted hand brakes are rugged, dependable USA-made tools that won't break your budget. Model HBU48-16 is a heavy-duty bench brake suitable for box and pan or straight bending up to 16 gauge mild steel.The brake features a removable apron angle and apron insert permitting 1/4 inch reverse bends in lighter materials. The upper leaf and nose bar has a wide range of adjustments for radius bending. Standard equipment includes an apron stop rod for repeat bends, extension handles, and a counterweight.Tennsmith's bench mounted hand brakes provide an economical means of performing a wide range of sheet metal bending and forming operations. These brakes are of all steel welded construction, readily adjustable, and utilize bronze bearings at the pivot points.

Condition: NEW

Type: BOX AND PAN BRAKE

Manufacturer: TENNSMITH

Model: 4FT

Type: manual Mild Steel Capacity: 22 gauge (.73mm) Stainless Capacity: 26 gauge (.45mm) Working Length (inches): 36 Min Forming Radius (inches): 1 Number/Dia Of Rolls: (3) 2 inch Driven Rolls: 2 Wire Grooves: 3/16 inch, 1/4 inch, 5/16 inch Weight (pounds): 250 Dimensions (LxWxH): 51 x 19 x 19

Tennsmith's SR36 slip roll combines precision-turned, ground, and polished high carbon steel rolls with heavy-duty cast iron end frames.

Convenient operating features include large roll adjusting screws, scales for speeding repeat set-up, and a front mounted handle to lift the upper roll for material removal. Wire grooves are also standard.

See accessories tab for optional stand, along with other slip roll accessories.

Condition: NEW

Type: SLIP ROLL

Manufacturer: TENNSMITH

Model: 36IN

Type: manual Mild Steel Capacity: 16 gauge (1.6mm) Stainless Capacity: 20 gauge (.9mm) Working Length (inches): 120 Max Lift Of Beam (inches): 2.25 Front To Rear Adj (inches): .5 Min Reverse Bend (inches): .25 Minimum Flange Capacity (inches): 1Max Forming Length (inches): 121 Weight (pounds): 2875 Dimensions (LxWxH): 161 x 53 x 59.5

Tennsmith's heavy-duty hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability. With much more substantial steel side plates than other domestically made units, these brakes have the rigidity required for upper beam adjustment without the use of wrenches. Equipped with thrust bearings, the upper leaf adjustment screws permit quick, accurate alignment for different material thicknesses or radii.Other adjustment features include:- leveling screws and lock nuts on the pedestals;- jack screws and tensioner bolts on the apron;- truss rods on the apron, base and upper beam;- fully adjustable counterbalances to facilitate the bending process- replaceable nose bar and apron inserts.Removable apron angle and insert permit 1/4-inch reverse bends in lighter material.Bored in line to ensure perfect alignment, the pivot points are fitted with oil impregnated bearings. The hinge pins are high-tensile, alloy steel.Ductile steel clamp handles, heavy yokes, grease fittings and an apron stop rod complement the many other fine features of these heavy-duty brakes.

Condition: NEW

Type: HEAVY DUTY STRAIGHT BRAKE

Manufacturer: TENNSMITH

Model: 10FT

Type: pneumatic Mild Steel Capacity: 16 gauge (1.6mm) Stainless Capacity: 20 gauge (.9mm) Cutting Length (inches): 52 Strokes: 40/minute Air Pressure (psi): 75 Weight (pounds): 950 Dimensions (LxWxH): 61 x 36 x 42

Tennsmith's power shears combine all the features of our foot shears with the advantage and convenience of air powered operation. Tennsmith power shears are a productive addition to any shop. The air shears utilize heavy-duty, tie rod-type pneumatic cylinders, which provide up to 40 strokes per minute in capacity materials.

A foot-operated air valve control, pressure regulator, air gauge, oiler/condenser cups and neoprene, padded hold down feet are standard features. We recommend a maximum air supply of 75 psi for operating these shears at rated capacity. Where air supply pressures exceed 75 psi, an in-line regulator is helpful to provide pressure control. Generally, a 10 hp stand-alone compressor would be the minimum recommended size to operate these shears.

All shears are standard equipped with high-carbon high-chromium (HCHC) blades.

Condition: NEW

Type: AIR POWERED SHEAR

Manufacturer: TENNSMITH

Model:52IN

Type: hydraulic Mild Steel Capacity: 16 gauge (1.6mm) Stainless Capacity: 20 gauge (.9mm) Cutting Length (inches): 52 Motor: 3hp 60hz 1745 rpm Strokes: 40/minute Weight (pounds): 950 Dimensions (LxWxH): 61 x 36 x 42

The model 52H cycles at 60 strokes a minute, thanks to its first class hydraulic system. The unit features a solenoid actuated valve, 3hp electric motor, 10 gallon tank with sight gauge and thermometer, pressure gauge, check valve and industrial quality cylinders. The motor is protected by a magnetic starter.

Other electrical safety features include a low voltage on/off switch; low voltage, shrouded, electric foot switch; step-down transformer with low voltage circuit fuse; fully enclosed electrical box; and insulated reinforced conduit for all wiring. All shears are standard equipped with high-carbon high-chromium (HCHC) blades.

Condition: NEW

Type: HYDRAULIC SHEAR

Manufacturer: TENNSMITH

Model: 52IN

Type: manual Mild Steel Capacity: 18 gauge (1.22mm) Stainless Capacity: 22 gauge (.73mm) Working Length (inches): 120 Max Lift Of Beam (inches): 1.875 Front To Rear Adj (inches): .5Min Reverse Bend (inches): .25Minimum Flange Capacity (inches): 1Max Forming Length (inches): 121Weight (pounds): 2300 Dimensions (LxWxH): 161 x 53 x 60

Tennsmith's heavy-duty hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability. With much more substantial steel side plates than other domestically made units, these brakes have the rigidity required for upper beam adjustment without the use of wrenches. Equipped with thrust bearings, the upper leaf adjustment screws permit quick, accurate alignment for different material thicknesses or radii.Other adjustment features include:- leveling screws and lock nuts on the pedestals;- jack screws and tensioner bolts on the apron;- truss rods on the apron, base and upper beam;- fully adjustable counterbalances to facilitate the bending process- replaceable nose bar and apron inserts.Removable apron angle and insert permit 1/4-inch reverse bends in lighter material.Bored in line to ensure perfect alignment, the pivot points are fitted with oil impregnated bearings. The hinge pins are high-tensile, alloy steel.Ductile steel clamp handles, heavy yokes, grease fittings and an apron stop rod complement the many other fine features of these heavy-duty brakes.

Condition: NEW

Type: HEAVY DUTY STRAIGHT BRAKE

Manufacturer: TENNSMITH

Model: 10FT

Type: manual Mild Steel Capacity: 20 gauge (.9mm) Stainless Capacity: 24 gauge (.6mm) Cutting Length (inches): 121 Weight (pounds): 2900 Dimensions (LxWxH): 135 x 60 x 56

Tennsmith's SK series shear is built with the quality and high exacting standards that customers have come to expect from all Tennsmith equipment. This model is ideal for customers interested in a 10 foot shearing capacity with the affordability of manual operation.

The SK shear is equipped with a standard 2x-R, 0-24 inch, quick-moving back gauge system, 4-edge high carbon / high chromium blades and precision bearings.

Condition: NEW

Type: MANUAL SHEAR

Manufacturer: TENNSMITH

Model: 120IN

Capacity, mild steel 14 gauge (2. 0 mm) Capacity, stainless steel 18 gauge (1. 25 mm) Bending length 150 in. (3800 mm) Bending bars - standard 1 in (25 mm), 7/16 in (11 mm) Crowning of the folding beam 5-point 0”- 0. 030” adjustment Folding beam adjustment 1 in. (25 mm) Folding beam speed 80° per second Back gauge depth - standard 41 in. (1041 mm) Back gauge depth - optional 61 in. (1550mm) Back gauge speed (0. 375” to 41” 5 seconds Clamping beam opening height 7 in. (178 mm) Clamping beam tooling 30° Clamping beam speed 2. 5” per second Back gauge motor 3/4 hp Clamping beam motor 2 hp Bending beam motor 2 + 2 hp Working height 34 in. (864 mm) Dimensions, l x w x h 204 x 96 x 72 in. 5182 x 2438 x 1829 mm Weight:

9,900 lbs. (4490 kg)

Condition: NEW

Type: AUTOMATIC FOLDER

Manufacturer: TENNSMITH

Model: SBS150-14 150

Capacity, mild steel 16 gauge (1. 5 mm) Capacity, stainless steel 20 gauge (1. 0 mm) Bending length 159 in. (4040 mm) Bending bars - standard 1 in (25 mm), 7/16 in (11 mm) Crowning of the folding beam 5-point 0”- 0. 030” adjustment Folding beam adjustment 1 in. (25 mm) Folding beam speed 80° per second Back gauge depth - standard 41 in. (1041 mm) Back gauge depth - optional 61 in. (1550mm) Back gauge speed (0. 375” to 41”) 5 seconds Clamping beam opening height 7 in. (178 mm) Clamping beam tooling 30° Clamping beam speed 2. 5” per second Back gauge motor 3/4 hp Clamping beam motor 2 hp Bending beam motor 2 + 2 hp Working height 34 in. (864 mm) Dimensions, l x w x h 210 x 96 x 72 in. 5334 x 2438 x 1829 mm Weight 9,220 lbs. (4182 kg)

Condition: NEW

Type: AUTOMATIC FOLDER

Manufacturer: TENNSMITH

Model: SBS159-16