Type: manual Mild Steel Capacity: 16 gauge (1.6mm) Stainless Capacity: 20 gauge (.9mm) Cutting Length (inches): 52 Weight (pounds): 950 Dimensions (LxWxH): 61 x 36 x 42

These Tennsmith kick shears (sometimes called stomp shears or foot squaring shears)are activated manually by stepping on the foot pedal on the front of the machine. They feature ground-alloy tool steel blades machined with an edge relief for maximum material penetration with minimum effort. These tri-action blades help prevent material movement while shearing while prolonging blade life. Tennsmith shears have the most complete adjustment features of any sheet metal shear on the market.

The lower shear blade is bed-adjusting and the upper blade is adjustable by means of a truss bar on the cutter head. The spring-activated hold down feet clamp the work piece securely in place and are easily adjustable to compensate holding pressure for light or heavy gauge material. There is ample clearance between the hold down feet and shear blades to allow good operator vision for line-of-sight cutting. The standard, double-locking back gauge, which features embossed scales and vernier wheels for fine adjustment, gives highly accurate readings.

Condition: NEW

Type: FOOT SHEAR

Manufacturer: TENNSMITH

Model: 52IN

Type: manual Mild Steel Capacity: 16 gauge (1.6mm) Stainless Capacity: 20 gauge (.9mm) Working Length (inches): 48 Max Depth Of Box (inches): 4 Max Lift Of Beam (inches): 1.25 Front To Rear Adj (inches): .625 Min Reverse Bend (inches): .25 Minimum Flange Capacity (inches): 1 Number/Width Of Fingers: 2, 3, 4 inch Max Forming Length (inches): 48-1/4 Weight (pounds): 495 Dimensions (LxWxH): 60 x 19 x 24

Tennsmith's bench mounted hand brakes are rugged, dependable USA-made tools that won't break your budget. Model HBU48-16 is a heavy-duty bench brake suitable for box and pan or straight bending up to 16 gauge mild steel.The brake features a removable apron angle and apron insert permitting 1/4 inch reverse bends in lighter materials. The upper leaf and nose bar has a wide range of adjustments for radius bending. Standard equipment includes an apron stop rod for repeat bends, extension handles, and a counterweight.Tennsmith's bench mounted hand brakes provide an economical means of performing a wide range of sheet metal bending and forming operations. These brakes are of all steel welded construction, readily adjustable, and utilize bronze bearings at the pivot points.

Condition: NEW

Type: BOX AND PAN BRAKE

Manufacturer: TENNSMITH

Model: 4FT

Type: manual Mild Steel Capacity: 22 gauge (.73mm) Stainless Capacity: 26 gauge (.45mm) Working Length (inches): 36 Min Forming Radius (inches): 1 Number/Dia Of Rolls: (3) 2 inch Driven Rolls: 2 Wire Grooves: 3/16 inch, 1/4 inch, 5/16 inch Weight (pounds): 250 Dimensions (LxWxH): 51 x 19 x 19

Tennsmith's SR36 slip roll combines precision-turned, ground, and polished high carbon steel rolls with heavy-duty cast iron end frames.

Convenient operating features include large roll adjusting screws, scales for speeding repeat set-up, and a front mounted handle to lift the upper roll for material removal. Wire grooves are also standard.

See accessories tab for optional stand, along with other slip roll accessories.

Condition: NEW

Type: SLIP ROLL

Manufacturer: TENNSMITH

Model: 36IN